JKWF series Hybrid reactive power compensation controller integrates the functions of Monitoring grid ,harmonic protection, compensation and fault warning,The series can be used in three-phase unbalanced load compensation system, suitable for AC 0.4kV, 50Hz low-voltage power distribution system monitoring and reactive power compensation control.JKWF-18F is a special type of welding machine.
Voltage,current,fact,active power,reactive power
frequency,THDi ,THDu
3rd-13th HRi,HRu
Over voltage,under voltage,high harmonic rate protection and alarm
Outputs will be Auto reset,when power on system
Auto lock when sample current is below 0.1A
Data protection after power off
型号 |
补偿方式 |
基本参数测量 |
保护功能 |
输出路数/接点 |
适配投切开关 |
通讯接口及方式 |
JKWF-12D /16D/18E /18F/24F |
混合补偿 (单相分补+三相共补) |
电压/电流/功率因数/有功/无功功率等;电容器投切状态;电压总谐波畸变率、电流总谐波畸变率,系统频率, 三相3-13次电压、电流畸变率(18E/18F/24F型) |
过压保护 欠压保护 缺相保护 谐波保护 |
12路、16路 有源接点 DC12V 60mA/路 18路、24路 有源接点 DC12V 40mA/路 |
抗谐波开关 调节器开关 复合开关 可控硅模块 |
RS485 |